Flotec FP4012-00L 1/2 HP Shallow Well Pump Jet

Flotec FP4012-00L 1/2 HP Shallow Well Pump Jet

Regular Price: $195.99 | Price with discount: $170.37 | You Save: $25.62 (13%)

Got a Question for me? Powered by Aol.com   Product Details Measures 6.0-by-7.0-by-11-Inch (width by height by depth); weighs 26 Pound Offers superior performance at capacities to 10 GPM at 40 PSI Fiberglass-reinforced thermoplastic provides incredible corrosion and sandy water resistance; dust-proof cover protects all electrical components from dust and insects Includes stainless steel shaft, heavy duty ball bearings, balanced rotor, mechanical shaft seal and insulated motor windings Built-in shallow well pump jet ideal for wells with pumping levels of 25-Feet or less Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Customer Review

Great pump
I installed this pump with a small cistern at my vacation home. Works perfectly. It's quiet and the installation was very simple (I'm not a contractor or a plumber). I would highly recommend this pump for your water system.
Top to learn more

September 13, 2009 (Phoenix, AZ USA) | Helpful Votes: 1 | Rating: 5

Good Pump - Runs "well" - nyuck nyuck
Customer Video Review Length:: 1:59 MinsGood pump, runs great, runs relatively quiet. In my video review it sounds really loud, but that's because my camera's microphone is right in front of it. It's not that loud. Once the cabinet doors are closed, it's just low-level back round noise in the house when it kicks on.Piece of advice; there's two, quarter inch plugs on the front of pump... take them out, remove and reapply the Teflon tape and re-tighten. They leaked on me during my initial start up.My old pump was a very expensive convertible Simer jet pump that the previous owner had bought and installed, and I wouldn't have replaced it except I accidentally let it freeze and the housing cracked (which is why I moved this installation inside under my cabinets). The Simer pump was high quality and definitely worth what the previous owner paid for it. The point I'm coming to here is... this pump, so far, out performs the Simer and this one is less than half the cost. It's...
Top to learn more

January 7, 2012 | Helpful Votes: 0 | Rating: 5

Product Description

This 1/2 HP, built-in shallow well pump jet from Flotec is ideal for wells with pumping levels of 25 feet or less. Featuring a corrosion-resistant nozzle and venturi, this model offers superior performance at capacities to 10 GPM at 40 PSI. It works by self-priming after the pump housing is initially filled with water. The fiberglass-reinforced thermoplastic construction provides incredible corrosion resistance, as well as resistance to sandy water. The dust-proof cover protects all electrical components from dust and insects, thus resulting in a longer-lasting motor. With a stainless steel shaft, heavy duty ball bearings, balanced rotor, mechanical shaft seal and insulated motor windings, the pump's powerful motor delivers non-stop operation for years to come. Top to learn more

Wayne SWS50 1/2 HP 384 GPH Shallow Well Jet Pump, Cast Iron

Regular Price: $253.00 | Price with discount: $180.44 | You Save: $72.56 (29%)

Got a Question for me? Powered by Aol.com   Product Details Self-priming 1/2-horsepower shallow well jet pump 3-year limited warranty Thermal protection prevents motor overheating Use in wells up to 25-feet deep Pumps up to 384-gallons per hour at 5-foot lift Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Customer Review

Great pump, good price.
This was a replacement for a 1/2 hp Flotech cistern pump that gave me nothing but grief. It is quieter and much stronger than the FloTech (which only gave me 5 years). I think it is a great, well-made pump for the price. My Flotech took upwards of two minutes to recharge the pressure tank - this one does it in less than 40 seconds. The pressure switch is 30/50 but you can increase/descrease it about 5 PSI either direction. The two outflow ports are a nice touch - I replaced the priming plug with a valve to make it easier to prime.
Top to learn more

April 18, 2011 (San Felipe, Baja MEX) | Helpful Votes: 2 | Rating: 5

Good Quality
Installed for a cistern. Exact replacement for the one I bought 17 years ago. Been working since with no problems for 1 1/2 years. Good price
Top to learn more

November 8, 2009 | Helpful Votes: 1 | Rating: 5

Product Description

The Wayne 1/2 HP 384 GPH shallow well jet pump is designed for wells up to 25 feet deep, with jet pumps housed in rugged cast iron housing. The pump self-primes after its housing is filled with water, and it pumps out 385 gallons per hour at a five-foot lift, or 384 gallons per hour at a 25-foot lift. You can run the pump at 115 or 230 volts with the quick change voltage selection switch, and the pressure switch is set to 30 psi on and 50 psi off for high-pressure delivery. The square flange motor has thermal protection to prevent overheating, and Wayne backs its pump with a three-year limited warranty. Top to learn more

Wayne SWS50 1/2 HP 384 GPH Shallow Well Jet Pump
Very quiet. Had to use the 220v and changing from 110 to 220 was a piece of cake. Definitely would recommend this pump.
Top to learn more

November 7, 2011 | Helpful Votes: 0 | Rating: 4

Flotec FP5172 1-1/2 HP Self-Priming High Capacity Sprinkler Pump

Regular Price: $309.99 | Price with discount: $250.00 | You Save: $59.99 (19%)

Got a Question for me? Powered by Aol.com   Product Details Measures 6.0-by-8.0-by-9.0 inches (WxHxD); weighs 41.5 pounds; 1-year warranty Capable of operating up to 30 sprinkler heads; delivers 115/230 motor voltage and offers dual voltage capability Self-priming design permits use on automatic sprinkler systems as well as de-watering and water transfer Constructed of rugged, heavy-duty fiberglass-reinforced thermoplastic Self-priming, corrosion-resistant, high-capacity sprinkler pump This item is eligible for FREE SHIPPING Sale Price: $250.00You Save $59.99 (19%) Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Customer Review

5 zone irrigation Pump with jetted well for over a year
Please remember that all things manufactured have variations in quality. Mine is one example, yours may not perform quite the same.I have had this pump (bought from Home Depot) for about a year and a half. I'm beginning my second summer, though here in Florida I have to water our yard year round. So the pump has had a lot of usage. Also, I have the pump installed inside of a small pump house that looks more like a doghouse, but has good ventilation.I installed my well myself, and I now know that my initial well had too little screen and was installed partly in clay. I have since reinstalled my well with more screen and centered more in the water flowing sand. Why am I telling you this? Because I can tell you how this pump worked for me in both ideal and non-ideal conditions.With my origional well, I had trouble getting more than ~6gpm without the pump reaching max flow (when the pump starts to surge audibly). I replaced the heads of my...
Top to learn more

May 31, 2009 (Orlando, FL) | Helpful Votes: 18 | Rating: 5

Product Description

This Flotec model is a self-priming, corrosion-resistant, high-capacity sprinkler pump that's constructed of rugged, heavy-duty fiberglass-reinforced thermoplastic. Capable of operating up to 30 sprinkler heads and designed for continuous operation, this pump delivers 115/230 motor voltage and offers dual voltage capability. Ideal for lawn sprinkling, the self-priming design of this efficient model permits use on automatic sprinkler systems as well as on de-watering and water transfer.

For added convenience, this 1.5 HP pump has an easily accessible design that makes it a snap to reach parts that need service due to normal wear and tear. It also comes with a 1-year warranty. Top to learn more

A bit loud
I bought this to replace a failed sprinkler pump (motor rusted out completely - pump was probably still good). Really was looking for a more efficient pump but couldn't find one. This one appeared to be the exact same as the old Flotec but the new housing is plastic. Motor looks to be better protected against corrosion anyway. The thing was about 1 inch taller than before so I had to cut the feed pipe and install a splice which was a nuisance.Seems to work OK. Maybe a bit more powerful than the old one but also seems a bit louder. Lowes had one a bit cheaper but last time I bought a pump from them my lawn guy said it was junk and it didn't last a year. This last one (Flotec) lasted about 8 years which is not too bad considering the salt in the air where we live rusts everything.
Top to learn more

October 6, 2008 (Olga, WA) | Helpful Votes: 17 | Rating: 3

Flotec FP5172 1-1/2HP Sprinkler Pump
This Flotec FP5172 1-1/2HP Sprinkler Pump was purchased to replace a 10 year old cast iron pump that had an AO Smith motor. The old pump simply rusted away and hopefully this new Flotec will work and last just as well. The motors are basically the same, both AO Smith 1-1/2HP. I've had this Flotec in use for about 1 month now.The Flotec seems to be a nice pump, reasonably priced, well constructed, and was very easy to assemble and a lot lighter to lift than the old cast iron pump. The Flotec has lots of plastic which includes the pump body and the motor base/stand. The motor is an AO Smith and the complete unit is just like a Sta-Rite Swimming Pool pump minus the filter basket.It took me about 2-3 hours to remove my broken pump and install this new Flotec. The Flotec comes prewired for 220VAC but can be switched to 110VAC easily. The hardest part was determining how tight to turn the 1-1/2" fittings that go into the plastic pump body. The instructions gave a...
Top to learn more

March 16, 2009 (USA) | Helpful Votes: 13 | Rating: 4

Wayne SWS75 3/4-Horsepower Cast Iron Shallow Well Jet Pump

Regular Price: $264.56 | Price with discount: $210.34 | You Save: $54.22 (20%)

Got a Question for me? Powered by Aol.com   Product Details Durable cast iron volute Dedicated priming port for volute filling Dual voltage (120/240-Volt) high efficiency square flanged motor is factory wired for 120-Volt. 3/4-Inch NPT discharge with 1-1/4-Inch discharge Pumps up to 468-Gallon per hour Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Customer Review

Nice shallow well pump.
When my previous pump(a flotec)died, I ordered a new one from Amazon.com. It arrived in a few days, I immediately installed it and it works great, it was an easy installation with a few leaks, which I repaired with teflon tape and pipe compound. I have used about 1 month woth no problems. I highly recommend this pum.
Top to learn more

July 22, 2011 (USA) | Helpful Votes: 3 | Rating: 5

self priming well pump
I just purchased the wayne sws75 shallow well pump with a little skepticism. It was not advertised by wayne as a self priming pump, which means you do not need a foot valve at the bottom of your shallow well, only a check valve at top of the well head. I plumbed it according to the diagram in the instruction manual (which leaves much to be desired), only to have to re-plumb the pressure tank. Once i did this it has worked great, It has drawn water out with no problem, It is quiet, powerful, and well worth the cost. I hope it last several years.
Top to learn more

July 9, 2011 | Helpful Votes: 3 | Rating: 5

Product Description

3/4 HP Cast Iron Shallow Well Jet Pump, 3 Year Warranty. Top to learn more

Hard wired ......... needed
Ok the pump is great .... but nowhere do the tell you that you can not just plug this in. You need a electrician to HARD ~ WIRE this to get it working.
Top to learn more

September 11, 2011 | Helpful Votes: 3 | Rating: 4

Flotec FP4322 3/4 HP Corrosion Resistant Convertible Jet Pump

Regular Price: $439.51 | Price with discount: $250.08 | You Save: $189.43 (43%)

Got a Question for me? Powered by Aol.com   Product Details Ideal for shallow well applications with pumping levels to 25-Feet, and for deep well applications with pumping levels to 110-Feet Built-in regulator is adjustable for best performance on all deep well applications Constructed of non-corrosive, rugged fiberglass-reinforced thermoplastic High resistance to sand and abrasive wear, assuring years of dependable service Can be used in shallow or deep well installation in 2-Inch wells or larger This item is eligible for FREE SHIPPING Sale Price: $250.08You Save $189.43 (43%) Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Product Description

Can be used in shallow or deep well installation in 2 inch wells or larger Ideal for shallow well applications with pumping levels to 25, and for deep well applications with pumping levels to 110 Constructed of non-corrosive, rugged fiberglass-reinforced thermoplastic High resistance to sand and abrasive wear, assuring years of dependable service Built-in regulator is adjustable for best performance on all deep well applications Pressure gauge is included Stainless steel clamp for quick access to all serviceable pump components Dust-proof cover protects all electrical components from dust and insects, providing a longer lasting motor Top to learn more

Flotec Shallow Well Jet Pump, 1 Hp

Regular Price: $279.99 | Price with discount: $265.74 | You Save: $14.25 (5%)

Got a Question for me? Powered by Aol.com   Product Details FP4032 1 HP SW JET PUMP 1 HP SW JET PUMP Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Product Description

Superior performance to depths of 25 ft. or less. Fiberglass reinforced thermoplastic pump housing for the highest corrosion resistance. Heavy duty dual voltage motor. Self-priming after housing is initially filled (CK valve and/or FT valve required). Very quiet operation. Pressure switch pre-wired with 30-50 PSI pressure setting. 1-1/4" NPT suction and 1" NPT discharge pipe sizes serviceable unit. Pumping capacity to 16.4 gallons per minute at 40 PSI. Dimensions: 22-1/2" length x 11" width x 10-1/4" height. Top to learn more